Specialist Restoration

Restore Your Parquet to Its Original Character

Podłogi Warszawa – Parquet Restoration: ideas and inspiration for your home — serving Warsaw, Masovian Voivodeship, Poland.

Before and after parquet floor restoration showing dramatic transformation from worn herringbone to gleaming restored wood
index visual 1

Why Parquet Floors Deserve Expert Hands

Pattern-preserving restoration that respects the craftsmanship of your floor. Unlike generic floor sanding services, we understand that herringbone and mosaic layouts demand precision. Each plank's angle, grain direction, and edge profile matters.

We don't rush the process. Our team inspects every section, identifies structural concerns early, and adjusts technique to match your floor's unique character. Whether your parquet sits in a tower block or a historic townhouse, we treat it as the architectural feature it is.

Sanding without understanding pattern flow leads to uneven finishes and grain direction confusion. We work with the wood, not against it—preserving the original design intent while restoring depth and protection.

Close-up macro shot of parquet wood grain and sanding dust, showing the detail and craftsmanship involved in restoration work
index visual 2

What We Restore • What We Don't

Clarity on floor types, preparation, and structural limits. We specialize in residential and small commercial interiors across Warsaw, but we're honest about what falls outside our scope.

We Restore

  • Herringbone parquet in flats and townhouses
  • Mosaic and geometric patterns
  • Single-strip and multi-strip layouts
  • Sanding and gap repair in occupied spaces
  • Refinishing with dust control
  • Small commercial interiors (offices, galleries, shops)
  • Aftercare guidance and maintenance tips

We Don't Handle

  • Structural repairs or subfloor replacement
  • Load-bearing joist or beam work
  • Severe water damage or rot
  • Complete floor replacement
  • Large-scale commercial tower projects
  • Parquet outside Warsaw and Masovian region

Service area: Warsaw, Masovian Voivodeship, Poland. We do not rush jobs or compromise on preparation—every floor receives a full site assessment before work begins.

index visual 3

From Inspection to Aftercare

A transparent, step-by-step restoration process. We demystify the timeline and what to expect at each stage, so you know exactly what's happening in your home or office.

1

Inspection & Assessment

We visit your space, examine the parquet pattern, check for structural issues, and discuss your expectations. No rush—we take time to understand your floor's history and condition.

2

Room Preparation

We guide you on furniture removal, door sealing, and ventilation setup. Dust control is essential, especially in occupied tower apartments or shared buildings.

3

Sanding & Levelling

Using pattern-aware techniques, we sand the entire floor to remove old finish and surface damage. We follow grain direction and respect herringbone angles throughout.

4

Gap Repair & Filling

We identify and repair gaps between planks using matching wood filler or traditional techniques. This step prevents future dirt accumulation and strengthens the floor visually.

5

Finishing & Sealing

We apply protective finish—oil, lacquer, or matte seal—depending on your preference and floor type. Multiple coats ensure durability without rushing the drying process.

6

Drying & Aftercare

We provide detailed drying guidance, ventilation tips, and long-term care instructions. Your floor is ready to live on—but we stay available for questions.

index visual 4

Room Prep, Finish Care & Drying Tips

Practical advice for before, during, and after restoration. Preparation and aftercare are as important as the sanding itself.

Pre-Restoration Checklist

  • Remove all furniture and rugs from the room
  • Clear closets and storage areas
  • Close interior doors with tape or plastic sheeting
  • Open windows and arrange cross-ventilation
  • Protect baseboards and door frames with tape
  • Ensure access for equipment and dust extraction
  • Plan for temporary living space if needed
  • Arrange pet and child care during work

Common Questions

How much dust will there be?

Modern dust extraction systems capture 95%+ of particles. We use HEPA filters and negative air pressure to minimize spread. Some fine dust is unavoidable, but we contain it aggressively.

How long does drying take?

Oil finishes: 3–5 days before light foot traffic; 2 weeks before full use. Lacquer: 24–48 hours. We provide detailed drying schedules and ventilation guidance for each finish type.

Will there be odour?

Yes, but not overwhelming. Dust and finish fumes are normal. Ventilation is key—open windows, use fans, and avoid sealed rooms. Odour typically clears within 48–72 hours.

Can I walk on the floor during work?

No. We need the space clear and sealed. We do not rush the process or allow foot traffic until sanding is complete and finish is set.

How do I care for my restored floor?

Avoid excess water, use felt pads under furniture, sweep regularly, and apply maintenance oil annually. We provide a detailed care sheet with your finish type.

Get Your Floor Assessed

Send us details about your parquet, and we'll arrange an inspection. We'll discuss your floor's condition, timeline, and next steps—no obligation, no pressure.

Phone: +48 509349081

Email: hello@oakedgewarsaw.pro

Visit:34 Czechowicka, South Praga, Warsaw 04-218, Masovian Voivodeship, Poland

Hours: Monday–Friday, 08:00–17:00